Provide The 12-Wires Oc Output , The Output Port Can Drive The Ssr ( Solide-State Realy ) Directly. Single Power Supply 13-24Vdc 12-Wires Optical Isolated Common Signal Input All The Input And Output Have The Signal Alarm As The Lack Of The Io Of The Pc Parallel Port, We Add 3 Axis 6Bit Independent Limit Switch Of The Io Input All The Input Signals Of The Pc Parallel Port Are Modified By The Schmitt Trigger And Increase The Anti-Jamming Capacity Of The Transmission Of The Digital Signal Using Mach 2, 3 As The Controlling Software, Makes The Application Of The Pc As The Industrial Control Possible Compatible With All The Pusle And Direction Signal Of The Stepper Or Servo Driver, Can Control The Lathe And Milling Machine To Work The Input Part Can Connect To The Mechanical Switch , Groove Optocoupler, Proximity Switch , Tool Presetter Etc.
The Interface Board P1-P17 Port Correspond To The Pin1-17 Of The Pc Parallel Port, The Parallel Port Pin 18-25 Is The Gnd. Control The 2-Wires Electromagnetic Relay Output By The Parallel P1 And P16, This Can Control The Cooling Pump And Lubricating Oil Pumpof The Lathe The Setup Of The P17 In The Mach 3 For The Charge Pump Can Control The Solide State Relay Output To Increase The Safety Of The Lathe. The P14 Can Provide The Accurate 0-10V Analog Voltage For The Main Axis Speed Control Signal, This Can Make The Frenquency Of The Speed Of The Spindle.
The Dimension: 170Mm*115Mm
Locating Hole: 119Mm*101Mm
what Is In Box ?
1 X Mach-Cnc Interface Board
Price: