Description
CNC Breakout Board adapter for PC Stepper Motor Driver
CNC interface board, you can make your computer into a powerful CNC controller!
1, to provide twelve Road OC (open collector mode set) output, to a total of twelve, opto-isolated input.
2, all input and output signal instructions.
3, single-voltage 13 - 24VDC (other voltages to be customized).
4, the computer parallel port output signal by the Schmitt trigger all the plastic and improve the digital signal transmission interference.
5, using the MACH2 / 3 parallel port control software, general PC for industrial control applications possible.
6, for less than the number of computer parallel port IO, increase the three-axis six separate limit switch input IO port.
7, with all the step pulse and direction signals, supporting the use of servo drives, control lathe, milling machine for CNC operation.
8, input for an external mechanical switch, groove coupler, proximity switches, etc. on the knife.
9, P1-P17 interface board and the computer parallel port signals correspond to the signal pins 1-17, 18-25 parallel port pin to power ground.
10, through the parallel port P1, P16 two-way solenoid control relay outputs can control the machine tool cooling pump, oil pump.
11, P17 for the mouth of the PUMP MACH in charge pump solid-state relay outputs can control all the way to improve the safety of machine operation.
12, by P14 supplying precise 0-10V analog voltage spindle speed control signal can control the frequency stability of spindle speed.
13, Dimension 170mm * 115mm, positioning holes 119mm * 101mm.
Package List:
1 * CNC Interface Board Adapter
1 * DB25 Connect cable
Price: